Archive Home
→
Centre of Excellence in Water Resources Engineering
→
Browsing Centre of Excellence in Water Resources Engineering by Issue Date

Browsing Centre of Excellence in Water Resources Engineering by Issue Date

Now showing items 1-20 of 37

Characterization of polyurethane and polyaniline blends for thermo-mechanical and electro-mechanical properties / I

Iqra Abdul Rasheed (Department of Polymer and Process Engineering, UET,, 2016)

In this study electrical conductivity of organic polymers is enhance by addition of intrinsically conducting polymers (ICPs). ICPs are also organic polymers having both optical and electrical properties. Polyaniline is one ...
Investigation of urban form and public transport use in lahore city /

Kamran, Muhammad (Department of Transportation Engineering & Management, UET, 2016)

Lahore, the most populated city of Punjab is expanding particularly on southern side due to migration of people from all over the province. Along with other different problems; Traffic problems are also generating due to ...
Flood zoning simulation

Qasim, Sarfraz (Department of Center of Excellence in Water Resources Engineering, UET, 2017)

Indus River is a major trans-boundary river in Asia. It has nine tributaries, five on the left bank (Sutlej, Jhelum, Beas, Ravi and Chenab) and four on the right bank (Kurram, Swat, Gomel and Kabul). A tragic and massive ...
Evaluation and study of particular failures of small dams in Pothohar plateau of Punjab

Haseeb ur Rehman (Department of Centre of Excellence in Water Resources Engineering, UET, 2017)

Small dams are an important source of both primary and productive water for rural communities. Small dams, in Pothohar region, are of great importance. It is against this background that this study was carried out to assess ...
Maximizing the energy of out put of HPP: Case study of nasirabad Hydro Power Project /

Zil-e-Huma Malik (Centre of Excellence in Water Resources Engineering, UET, 2017)

Pakistan is facing severe electricity crisis over a decade. Electricity demand is being met through expensive energy resources like thermal energy instead of renewable resources like hydropower. Every year sufficient ...
Fabrication of dye sensitized solar cell with enhanced Energy conversion efficiency using different counter electrode materials /

Shaista Rafique (Department of Physics, UET, 2017)

One of the challenges for cost e ective and e cient Dye-Sensitized Solar Cells (DSSCs) is the development of appropriate low-cost counter electrode (CE) materials. The CE is one of the crucial and indispensable components ...
Flood zoning simulation: A Case study of river swat from utror valley Kalam to Bazkhela /

Sarfraz, Qasim (Centre of Excellence in Water Resources Engineering, UET, 2017)

Indus River is a major trans-boundary river in Asia. It has nine tributaries, five on the left bank (Sutlej, Jhelum, Beas, Ravi and Chenab) and four on the right bank (Kurram, Swat, Gomel and Kabul). A tragic and massive ...
Effect of process parameters on volumetric shrinkage of plastics via injection molding simulation /

Mahmood Siddiqui (Department of Polymer & Process Engineering, UET, 2017)

This thesis presents the injection molding (IM) process parameters’ optimization to reduce the shrinkage and sink marks from a plastic part through injection molding (IM) simulation. Many researches have been conducted in ...
Evaluation and study of particular failures of small dams in pothohar plateau of punjab /

Haseeb-Ur-Rehman (Centre of Excellence in Water Resources Engineering, UET, 2017)

Small dams are an important source of both primary and productive water for rural communities. Small dams, in Pothohar region, are of great importance. It is against this background that this study was carried out to assess ...
Abrasivity characterization of selected rock formations of pakistan /

Yasir Majeed (Department of Mining Engineering, UET, 2017)

This study characterized the abrasivity potential and evaluated different rock abrasivity measurement methods on 51 rock units selected from different regions of Pakistan. For abrasivity measurements CERCHAR, LCPC and ...
Improvement of alignment in salt range area of motorway M-2 /

Usman Riaz (Department of Transportation Engineering & Management, UET, 2017)

functionality of the highway increases, the criteria of safety and geometric design become more significant. Lahore Islamabad Motorway (M-2) is one of the major motorways of Pakistan, connecting the Provincial and Federal ...
Experimental investigation of cross-flow induced vibrations in a tube bundle using wind tunnel /

Adnan Rashid, Muhammad (Department of Mechanical Engineering, UET, 2017)

Flow induced vibrations in heat exchangers and steam generators is one of the critical problems the present industry is facing over past few decades. It is of major concern for designers, process engineers and operators, ...
To study surface morphology of mechanically cleaved mica layers on oxidized silicon /

Maria Zafar (Department of Physics, UET, 2017)

Layered materials are solids with strong intra planar bonds and weak inter planar van der waal bonds. So these materials can be peeled off easily, peeling process is named as, exfoliation yielding 2D materials. 2D materials ...
Rock bursts analysis of parallel tunnels using numerical modelling /

Sohail Manzoor (Department of Mining Engineering, UET, 2017)

One of the essential components of the underground excavation design process, which directly influences the performance and stability of underground constructions, is knowledge of the in-situ and mining-induced stress. ...
Effect of dopants on the properties of bifeo3 /

Sameel Nasir (Department of Metallurgical & Materials Engineering, UET, 2017)

Bismuth ferrite (BiFeO3) is a lead free multiferroic, shows both ferroelectric and ferromagnetic properties in single phase a room temperature and has various applications like sensors, actuators, non-volatile memory ...
Maximizing the energy of out put of HPP: Case study of nasirabad Hydro Power Project /

Zil-e-Huma Malik (Centre of Excellence in Water Resources Engineering, UET, 2017)

Pakistan is facing severe electricity crisis over a decade. Electricity demand is being met through expensive energy resources like thermal energy instead of renewable resources like hydropower. Every year sufficient ...
Impact of brand personality and product involvement on perceived value with moderating role of sales promotions Empirical Testing of high end Pakistani Apparel Brands /

Behzad Husnain (Institution of Business & Management, UET, 2017)

Apparel industry in Pakistan has seen a major shift after the reduction in exports due to energy crisis and lack of government focus. Private business owners launched their own apparel brands for domestic apparel market ...
Investigation and optimization of the effect of machine vibrations on the dimensional surface quality in milling operations /

Sadaf Zahoor (Department of Industrial & Manufacturing Engineering, UET, 2017)

Following an extensive literature review on the vibrations in machining operations, experimental work is undertaken in two main phases on the investigation and optimization of effects of machine vibrations on dimensional ...
Study of petrophysical parameters and multiphase flow behavior of porous media /

Jam Muhammad Kashif (Department of Petroleum and Gas Engineering, UET, 2017)

Datta sandstone of Potwar Sub-basin of Pakistan has significant role with reference to hydrocarbon potential. The fields of Toot, Meyal, and Dhulian produces around 1500 million barrels of oil. Datta formation is disseminated ...
Impact of temperature & illumination for improvement in photovoltaic system efficiency/

Farrukh Javed (Centre of Excellence in Water Resources Engineering, UET, 2018)

This research endeavors to boost up the annual power production as well as efficiency of photovoltaic (PV) systems by investigating the combined effect of temperature and illumination, as these both have a significant ...

Browsing Centre of Excellence in Water Resources Engineering by Issue Date

Browsing Centre of Excellence in Water Resources Engineering by Issue Date

Search Archive

Browse

All of DSpace

This Community

My Account