Archive Home
→
Department of Chemical Engineering
→
Browsing Department of Chemical Engineering by Title

Browsing Department of Chemical Engineering by Title

Now showing items 1-20 of 41

Analyzing potential of graphene as additive in nanolubricant for an IC engine /

Nofal Umair (Department of Chemical Engineering, UET, 2019)

This thesis focus on the performance of graphene based nanolubricant in a 4-Stroke IC engine of a 125cc motorcycle engine. The nanolubricant was formulated using graphene Grade C particles and a 10W40 SF grade synthetic ...
Automatic disturbance rejection using quasilinear control

Ghulam Shabbir (Department of Computer Science & Engineering, UET, 2017)

In control theory, when controllers are designed it is assumed that there exists a value of controller e ort than can stabilize the system and additionally, the reference can be tracked. If on the other hand, the plant ...
A comparison of the energy efficiencies of various heat-integrated distillation columns /

Areej Javed (Department of Chemical Engineering, UET, 2018)

Distillation is the most widely used fluid separation and purification process, and accounts for a major share of the total energy consumption of the process industry. However, because of its relatively low thermodynamic ...
Control of unstable power swing using modified out-of-step tripping (ost) method /

Zahid Riaz (Centre for Energy Research & Development, UET, 2017)

Disturbances in power systems are common and they result in electromechanical oscillations called power swing. The power swings could be harsh and may lead to loss of synchronism among the interconnected generators. This ...
Design and implementation of 200 kV Van de graff generator with improved insulation characteristics /

Bilal Anwar, Muhammad (Department of Electrical Engineering, UET, 2018)

The Vann De Gra is very famous in the electrical industry, high-voltage X-rays, nuclear physics, and dielectric testing. It has gained its importance because of its unconventional design and high voltage capacity with ...
Design and modling of portable & safe chaff cutter machine /

Hammad, Muhammad (Department of Mechanical Engineering, UET, 2019)

Agriculture is consider to be backbone of Pakistani economy, it is estimated that 19.5% of Gross Development Product employing a large quantity of the workforce to provide raw materials for many regions of value-added. ...
Distributed robust optimal control and proportional power sharing of distributed generators in DC microgrid/

Ali Arsalan (Department of Chemical Engineering, UET, 2019)

Integration of DC Nanogrids (NGs) with distributed generators (DGs) have seen an unprecedented growth for rural electri cation. Stable and coordinated operation of these NGs needs to meet up many challenges such as ...
DOE based response surface regression methodology of the study of PVD coated cemented carbide tool performance on surface roughness /

Farooq Mustafa (Department of Mechanical Engineering, UET, 2019)

Now days PVD and CVD coated tools are widely used in different industries to ensure cost effectiveness in terms of tool life and work piece quality. Selection of tool geometry, its material and cutting parameters are very ...
Effect of operating parameters on mechanical properties of hybrid polymer /

Shoaib, Muhammad (Department of Chemical Engineering, UET, 2017)

During the last Era, human body’s parts has been replaced by synthetic materials and used successfully. These special materials are able to function in acquaintance with living tissue, with less bad reaction or rejection ...
Effect of phytochemicals under variable disinfection conditions on heterotrophic bacteria in canal water/

Shaheera Pervaiz (Department of Chemical Engineering, UET, 2018)

Availability of decontaminated and clean drinking water determines the living standard of individuals. Provision of clean drinking water appearing as a major problem because of increased population level. In this work, ...
Enhancement of compressive strength of SBR modified mortar /

Abreeza Amin (Department of Architectural Engineering & Design, UET, 2019)

SBR latex modified mortars and concretes are known for the excellent mechanical and durability properties, but the compressive strength, which is one of the most important properties, is reduced. Hence, the potential of ...
Experimental investigation on burnt clay pots of various heights for roof insulation of residential buildings /

Junaid Shafique (Department of Architecture, UET, 2018)

In this research an experimental investigation is conducted on Burnt Clay Pots (BCP) of various heights and air pockets to investigate their thermal performance against roof insulation for building in each case. These pots ...
Extraction of organic solvent (Ethanol) VIA pervaporation using composite membrane :

Afghan Iftikhar (Department of Chemical Engineering, UET, 2019)

Hybrid distillation-membrane setups have caught much attention in recent years due to their less energy usage compare to conventional separation techniques such as extractive distillation for ethanol purification. Membrane ...
Formulation of geopolymer concrete using lightweight aggregate /

Munib Ul Rehman (Department of Architectural Engineering & Design, UET, 2019)

Sustainable and greener production is the need of the hour due to abrupt demographic increase, depleting resources, ever increasing wastes and related environmental concerns. In this scenario, this study presents the ...
Hermite-Hadamard type integral inequalities for harmonically relative preinvex functions /

Sadia Afzal (Department of Mathematics, UET, 2018)

Inequalities plays a significant and wide spread role in the evolution of many fields of mathematics. In the growth of finite difference, integral and differential equations, there is far-reaching part of inequalities ...
Impact of erp quality on individual performance; mediating role of perceived usefulness and perceived ease of use /

Sadia Usman (Institution of Business & Management, UET, 2017)

Considering the manifold functions, Enterprise Resource Planning has obtained the vital importance now days; the main reason behind that success is its imperative role in the functional sectors of the economy. It is basically ...
Investigation on indgenous biomass feedstock upgradation as solid fuel/

Umair Aslam (Department of Chemical Engineering, UET, 2018)

Biomass, a lignocellulosic material, has a potential to act as an alternative solid fuel in the energy generation processes and offers a viable solution for energy shortfall in developing countries as it is cheap source ...
Malachite green dye removal from aqueous solution using fly ash based zeolites /

Saeed ul Hassan (Department of Chemical Engineering, UET, 2018)

Industries where colors and dyes are being widely used have a liquid colored waste that is directly sent to water streams without implementing any type of operation that can decrease its colored load. Such wastewaters ...
Modeling of one dimensional heterogeneous catalytic steam methane reforming over various catalysts in an adiabatic packed bed reactor/

Fahad Maqbool (Department of Chemical Engineering, UET, 2018)

In this work, one dimensional (1-D) non ideal plug flow mathematical model for the heterogeneous catalytic steam methane reforming (SMR) was developed in gPROMS model builder 4.1.0®, a software developed by Process System ...
A non-stationary binary four point subdivision technique /

Uzma Mukhtar (Department of Mathematics, UET, 2019)

A new non-stationary four-point binary approximating subdivision technique with the shape control parameter has been analysed. The proposed technique is the counter part of stationary four-point binary technique [13]. The ...

Browsing Department of Chemical Engineering by Title

Browsing Department of Chemical Engineering by Title

Search Archive

Browse

All of DSpace

This Community

My Account