UET Digital Archive: Recent submissions

  • Runge-Kutta methods : analysis and implementation / 
    Junaid Ahmad (Department of Mathematics, UET, 2019)
    In this thesis, we have developed new numerical methods in Runge-Kutta family for numerical solution of ordinary di erential equations. We have extended the idea of e ective order to Runge-Kutta Nystr om methods for ...
  • Time dynamics of antisymmetric bound states of josephson vortices / 
    Hiba Saqib (Department of Mathematics, UET, 2020)
  • A non-stationary binary four point subdivision technique / 
    Uzma Mukhtar (Department of Mathematics, UET, 2019)
    A new non-stationary four-point binary approximating subdivision technique with the shape control parameter has been analysed. The proposed technique is the counter part of stationary four-point binary technique [13]. The ...
  • Hermite-Hadamard type integral inequalities for harmonically relative preinvex functions / 
    Sadia Afzal (Department of Mathematics, UET, 2018)
    Inequalities plays a significant and wide spread role in the evolution of many fields of mathematics. In the growth of finite difference, integral and differential equations, there is far-reaching part of inequalities ...
  • Experimental investigation on burnt clay pots of various heights for roof insulation of residential buildings / 
    Junaid Shafique (Department of Architecture, UET, 2018)
    In this research an experimental investigation is conducted on Burnt Clay Pots (BCP) of various heights and air pockets to investigate their thermal performance against roof insulation for building in each case. These pots ...
  • Formulation of geopolymer concrete using lightweight aggregate / 
    Munib Ul Rehman (Department of Architectural Engineering & Design, UET, 2019)
    Sustainable and greener production is the need of the hour due to abrupt demographic increase, depleting resources, ever increasing wastes and related environmental concerns. In this scenario, this study presents the ...
  • Study of decorative acid staining on concrete floor / 
    Waqas Ahmad (Department of Architecture, UET, 2019)
    Flooring in any building has substantial aesthetic effects on the interior. Flooring techniques frequently being used in Asia and especially Pakistan are rigid in nature. Typically used flooring types are marble flooring, ...
  • Enhancement of compressive strength of SBR modified mortar / 
    Abreeza Amin (Department of Architectural Engineering & Design, UET, 2019)
    SBR latex modified mortars and concretes are known for the excellent mechanical and durability properties, but the compressive strength, which is one of the most important properties, is reduced. Hence, the potential of ...
  • A comparison of the energy efficiencies of various heat-integrated distillation columns / 
    Areej Javed (Department of Chemical Engineering, UET, 2018)
    Distillation is the most widely used fluid separation and purification process, and accounts for a major share of the total energy consumption of the process industry. However, because of its relatively low thermodynamic ...
  • Upgradation of high co2-content natural gas by low-temperature distillation / 
    Usman Hamid (Department of Chemical Engineering, UET, 2019)
    High 2CO content in natural gas reduces the overall calorific value and creates handling and transportation problems. In the low-temperature distillation process for 2CO removal from natural gas, methane is recovered as ...
  • Physico-chemical cleaning of bag filters / 
    Younis, Muhammad (Department of Chemical Engineering, UET, 2018)
    In last years, desalination by reverse osmosis (RO) process has experienced a significant development, and it has become one of the major technologies for producing potable water throughout the world. Despite this relevant ...
  • Syngas production from pyrolysis of furnace oil / 
    Aleena Nadeem (Department of Chemical Engineering, UET, 2019)
    Furnace oil finds a great potential in power generation in Pakistan because refineries are producing it at a large rate. Poor quality fuel burning in power plants is the main cause behind smog. Prime Minister has issued ...
  • Treatment of dye laden wastewater through electrocoagulation : 
    Adnan Akhtar (Department of Chemical Engineering, UET, 2019)
    Wastewater discharge from textile sector has raised certain concerns, resulting in an unavoidable trade-off between industrial growth and environmental degradation. According to statistics, textile sector generates 200-350 ...
  • Study of thermo-chemical kinetics of raw and pre-treated industrial lingocellulosic waste biomass and coal blends during pyrolysis / 
    Umair Zaka, Muhammad (Department of Chemical Engineering, UET, 2019)
    Coal co-pyrolysis with sustainable power source, for example, biomass like wood squander, rice husk and wheat straw etc. could be used as an elective path for energy generation. High-quality fuel production using low ...
  • MEMS electro thermal actuators : modeling and simulation / 
    Arslan, Muhammad (Department of Electrical Engineering, UET, 2018)
    In recent years, MEMS sensors and actuators are getting more attention in daily life application due to its compactness, miniaturization, inexpensive and highly efficient as compare to the other ordinary devices. In this ...
  • Groundwater recharge of Lahore city by ponding in River Ravi / 
    Abaid Ullah (Centre of Excellence in Water Resources Engineering, UET, 2019)
    Groundwater plays an important role for domestic, agriculture, urban and in industrial purposes for the city of Lahore. Due to continuous increase in population and people moving towards the urbanized areas causes the extra ...
  • Energy conservation and auditing of master industrial complex / 
    Waqas Uddin (Centre for Energy Research and Development, UET, 2019)
    The energy demand is increasing annually by 5% because of the increasing population and industrial expansion in Pakistan. The major source of electrical consumption by industry is 34% in Pakistan. Energy conservation and ...
  • Multiregional evaluation of sm2rain satellite based precipitation product in Pakistan / 
    Ehtsham, Muhammad (Centre of Excellence in Water Resources Engineering, UET, 2019)
    Satellite precipitation products are being used at a global scale for rainfall estimation and mostly providing a reliable opportunity in in-situ data sparse region. Tropical Rainfall Measuring Mission version-07 (hereafter ...
  • Optimization of hydropower for sustainable energy in Pakistan / 
    Sumaira Khanum (Centre of Excellence in Water Resources Engineering, UET,, 2019)
    With an increasing usage and demand of the technology, electricity has become a basic need of human life. Pakistan has been blessed with a lot of energy production resources (hydel, thermal, wind, solar). However, the ...
  • Estimation of water budget for an irrigation channel : 
    : Ahmad Mujataba (Centre of Excellence in Water Resources Engineering, UET,, 2018)
    The estimation of groundwater budget for a region/area is most important factor in hydrogeologic studies of water related projects. A groundwater budget is an analysis of ground basin’s inflow and outflow to determine the ...

Search Archive

Browse

My Account